Protecting your property from flooding in nine easy steps...
Step 1
When the Waterwall System is installed the post holders, with protective caps, remain inconspicuous and allow full and uninterrupted access to any location or opening.
Step 2
As soon as it becomes obvious that the Waterwall System will be required, the easy and quick removal of the protective caps begins the process of erecting the banner.
Step 3
Insertion of the post into the post holder is done in a matter of seconds and a quick twist holds it in place.
Step 4
In this same manner, a long run of posts can be installed in next to no time, with the minimum of effort or stress.
Step 5
Once this process has been completed, the sealing plates can be inserted into the runners between the posts.
Step 6
Each plate is able to slide down, allowing for the seals in the posts and on the undersides of the plates to become watertight.
Step 7
Within a matter of minutes large areas can be made to hold back water, as the flood height increases.
Step 8
Finally, to ensure the seals are at their maximum compression, top locks are rotated and tightened.
Step 9
Within an extremely short period of time the Waterwall System has gone from unobtrusive caps in the ground, to a full height flood protection system.
Waterwall System has been designed for ease and speed of use, especially in the stressful minutes following a flood alert and, after it has completed its job, Waterwall System can be dismantled and stored away safely for the next moment of emergency.
Waterwall System has been designed for ease and speed of use, especially in the stressful minutes following a flood alert and, after it has completed its job, Waterwall System can be dismantled and stored away safely for the next moment of emergency.
Download Brochure
Please click the button below to download our brochure. (Requires acrobat reader)