Adjustable Pedestal Base Units
The Caro Pedestal Bases are available in four heights which, when the relevant Support Plate is chosen (for Decking, Paving and Gridded areas), will give a huge amount of choice for height variances. The large and easy to access threaded “wheel” adjuster gives infinite height tuning, so as to achieve the perfect flat surface.
Each of the above pedestal bases off the following height adjustment:
PV5/9 - Adjustable base for heights from 52mm-84mm
PV9/13 - Adjustable base for heights from 88mm-121mm
PV11/15 - Adjustable base for heights from 111mm-144mm
PV15/19 - Adjustable base for heights from 150mm-183mm
For use with all Adjustable bases, the C3/4T supports Pavings allowing a constant 3mm gap between each slab.
For use with all Adjustable bases, CP will support decking joists, up to 75mm width, with it’s Patented “Twist and Fix” feature.
Also for use with Decking Joists. Simply fix through the upright to ensure secure installation.
For use where the supported material doesn’t require securing or fixing ie. edges, fully butted together boards/ slabs, grills or grids, etc.
The addition of an F35 Extension Piece will increase the height of the Base Unit chosen by an extra 35mm. They can be added in multiples of one or more.
The HS2 Slope Corrector, when placed under the Base Plate, will compensate for a 2 degree slope. If a second HS2 Slope Corrector is added, the Caro Pedestal will cater for a 4 degree slope. Click here for extra graphics that show multiples in use for greater inclines.
The above graphic indicates the use of a PV9/13 Base with AF100 and F35 Extensions and a CP Decking Support Plate. The HS2 Slope Corrector will add a further 5mm to the height at this point. This modular concept allows for all variations to be catered for.
The addition of an AF100 Extension Piece will increase the height of the Base Unit chosen by an extra 100mm. They can be added in multiples of one or more.
The Rubber Packer Shim is 2mm thick and, apart from offering acoustic and slippage benefits, they can be used for compensation of irregularities on the underside of materials being supported. Simple to cut, if required, the Shims give that final tweak to the system.
Technical SupportFor technical assistance or pricing & availability on the Caro Pedestal, please call our Sales Department on (01763) 244446 or you can enquire using our online form.
Caro Pedestal Literature
FASTRACK CAD drawings for the Caro Pedestal