Flood Defence Systems - Paving & Decking Supports - Roof & Floor Drainage - Die & Sand Casting Foundry 
Hello guest
Your basket is empty

Paving & Decking Rubber Pedestal Support Pads - The RC Range 

Caro's range of paving and decking rubber support pads and pedestals are available in four heights which, when the relevant Support Plate is chosen for Paving, or decking give a huge amount of choice for lower height variances. 
 
Successfully specified and used throughout Europe since 1978, the rubber support pads and pedestals offer a very comprehensive answer to the problem of Decked and Gridded areas. Allowing for a variety of heights and levels using the various bases shown below. 
 
If you have any questions regarding our paving pedestal range, or our decking and stackable Caro Support ranges, don’t hesitate to get in touch!  

RC10 with CI0 

Fixed Height Rubber Support Base: 10mm high. Shown with CI0 support plate attached - a support plate with no upstands. Perfect for sitting under the centre of the slab/tile should extra reinforcement be required. 

RC10 with CIPV 

Fixed Height Rubber Support Base: 10mm high. Shown with CIPV support plate attached - for use with Decking Joists. Simply fix through the upright to ensure secure installation. 

RC10 with CI3/4T 

Fixed Height Rubber Support Base: 10mm high. Shown with CI34T support plate attached - for use with Paving and Tiles and provides a constant 3mm gap between each slab/tile. 

RC14 with CI0 

Fixed Height Rubber Support Base: 14mm high. Shown with CI0 support plate attached - a support plate with no upstands. Perfect for sitting under the centre of the slab/tile should extra reinforcement be required. 

RC14 with CIPV 

Fixed Height Rubber Support Base: 14mm high. Shown with CIPV support plate attached - for use with Decking Joists. Simply fix through the upright to ensure secure installation. 

RC14 with CI3/4T 

Fixed Height Rubber Support Base: 14mm high. Shown with CI34T support plate attached - for use with Paving and Tiles and provides a constant 3mm gap between each slab/tile. 

PS2 

The Rubber Packer Shim is 2mm thick and, apart from offering acoustic and slippage benefits, they can be used for compensation of irregularities on the underside of materials being supported. Simple to cut, if required, the shims give that final tweak to the system. 

Useful Links 

Technical Support 

For technical assistance or pricing & availability on the Caro Pedestal, please call our sales department on (01763) 244446 or you can enquire using our online form
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings