Caroflow Floor Drainage Products
Grating Assemblies Specifications
Caroflow Grating Assemblies are designed for use with all versions of the Untrapped and Trapped Floor Outlets and are manufactured in Stainless Steel.
The grate is secured with stainless steel screws within the bezel surround that has been assembled with a throat of 110mm tube.
These throats (or spigots) can be produced in any length, although the standard sizes are:
Short Spigot (Code /SS) 45mm length
Medium Spigot (Code /MS) 100mm length
Long Spigot (Code /LS) 200mm length
The large diameter of the mouth of the spigot also allows much easier and unobstructed access for rodding and cleaning.
The throat is then inserted into the clamping ring opening of its respective Untrapped or Trapped Floor Outlet that contains a retained ring seal. The ring then gives an airtight seal whilst still allowing full vertical and horizontal movement to ensure the final position is completely flush with the finished flooring.
FD/SS/150C
150mm dia. Stainless Steel Circular Grate and Bezel Assembly. Suitable for screeded floor finishes.
Codes
Short Spigot – FD/SS/150C/SS – Dimension A = 75mm
Medium Spigot – FD/SS/150C/MS – Dimension A = 130mm
Long Spigot – FD/SS/150C/LS – Dimension A = 230mm
FD/SS/150S
150mm Stainless Steel Square Tile Grate and Bezel Assembly. Suitable for tiled floor finishes.
Codes
Short Spigot – FD/SS/150S/SS – Dimension A = 75mm
Medium Spigot – FD/SS/150S/MS – Dimension A = 130mm
Long Spigot – FD/SS/150S/LS – Dimension A = 230mm
FD/SS/150CF
150mm Stainless Steel Grate and Bezel Assembly with clamping flange. Suitable for sheet/vinyl floor finishes.
Codes
Short Spigot – FD/SS/150CF/SS – Dimension A = 75mm
Medium Spigot – FD/SS/150CF/MS – Dimension A = 130mm
Long Spigot – FD/SS/150CF/LS – Dimension A = 230mm
Useful Links
Technical Support
To request a quotation, hard copy literature or any further assistance, please call our sales department on (01763) 244446 or you can enquire using our online form.