WaterDoor Component Parts
Wall Rails & Panel Sealing ScrewsThe permanently fixed wall rails are available in two forms, either “reveal fix” which means fixing in between the reveals/brickwork of the doorway or “face fix” which means fixing onto the face of the brickwork. Each wall rail comes with a recess to accept a Wall Rail Compression Block (see Wall Rail Compression Blocks) and has a seal on the inner side to form the water tight seal when the WaterDoor is deployed. The panel sealing screws protrude horizontally through the fixed wall rails and demountable posts to secure the Aluminium panels against the rubber seals on the inside of the rails/posts to prevent any flood water ingress.
Panel ExtrusionEach individual panel is 300mm high x 20mm thick and is supplied with rubber seals to prevent water ingress. As all WaterDoor barriers are manufactured to order, the Aluminium panel is cut to the required length.
Wall Rail Compression BlockThe compression block is inserted into a recess at the top of the fixed wall rails and is used to ensure adequate downward pressure is applied to each end of the barrier.
Compression PostThe compression post is utilised for WaterDoor barriers that span over widths of 1500mm but less than 2000mm. This component ensures that adequate downward pressure is applied along the entire barrier length.
Useful LinksWaterwall and Waterdoor Literature
CAD drawings for the Waterwall and Waterdoor